2024 Exmark Quest V-Series QZV060B0242H00

Selling Price -

$6,499.00

6 POD CHARGER INCLUDED.

Information

2024 Exmark Quest V-Series QZV060B0242H00

The low center of gravity design, large drive and caster tires and comfortable operator seat keep you comfortably in control, with increased legroom for the operator. A standard deck step eases mounting and dismounting of the Quest V-Series. Maintenance is minimized with the electric powertrain, integrated hydro transmissions and just two annual grease points.

Features may include:
  • 10-Amp Flex-Force Power System
  • Lower Noise Output
  • Onboard Intelligence
  • 60V 6-Pod Charger

Photos

Highlights

  • $6,499.00
  • Stryker, Ohio
  • New
  • 2024
  • Exmark
  • Quest V-Series QZV060B0242H00
  • Spec: 3099 | Series: 7000 Series
  • Electric
  • Available
  • 59.5 in. (151.0 cm)
  • Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. | 47.6 in. (121.0 cm)
  • 42
  • Fabricated

Specifications

  • 2024
  • Exmark
  • Quest V-Series
  • QZV060B0242H00
  • Zero-Turn Mower
  • Spec: 3099 | Series: 7000 Series
  • 735
  • 3,600 rpm
  • Standard Engine Manufacturer's air filter
  • Fuel Indicator: Translucent Visual | Carbureted
  • Gas Carbureted
  • Engagement: Electromagnetic 105-ft-lb clutch
  • Hydro-Drive | Description: Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
  • Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
  • Lever-actuated pawl brake.
  • 22 x 11-10 K3012 | Caster: 13 x 6.5-5 smooth-tread, pneumatic.
  • 22 x 11-10 K3012
  • 12 volt battery with 15-amp alternator
  • Forward: 0–8.0 mph (12.9 kmph) | Reverse:0–5.0 mph (8.0 kmph)
  • Blade: Approximately 18,500 fpm.
  • Tractor: Unibody, riveted 10-guage steel.
  • Package: Operator Presence Controls (OPC) and drive system interlock.
  • Casters: .375" thick caster yoke arms.
  • Blade Cutter Housing: 7.30" | Blade Shaft: 17mm (.67")
  • Deck: 42"
  • 59.5 in. (151.0 cm)
  • Blades: 3 Blades at 16.25" | 76.0 in. (193.0 cm)
  • Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. | 47.6 in. (121.0 cm)
  • 3-gallon (11.0-L), single fuel tank with single fill locations
  • Curb: 680
  • Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position.
  • Style: Floating | Style Description: Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
  • 42
  • Fabricated