2024 Exmark Lazer Z S-Series LZS749AKC524A2

Selling Price -

$15,499.00

Information

2024 Exmark Lazer Z S-Series LZS749AKC524A2

With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Features may include:
  • Less Time At The Pump
  • On-Board Diagnostics
  • Ultracut Series 4 Deck
  • Built to Last
  • Fewer Grease Points
  • Tool-less Belt Removal

Photos

Highlights

  • $15,499.00
  • Stryker, Ohio
  • New
  • LZS749AKC524a2
  • 2024
  • Exmark
  • Lazer Z S-Series LZS749AKC524A2
  • Kohler
  • 26.5
  • Gas
  • Available
  • 64.8 in. (164.6 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
  • 52
  • Kohler

Specifications

  • 2024
  • Exmark
  • Lazer Z S-Series
  • LZS749AKC524A2
  • Zero-Turn Mower
  • Model: ECV749 | Series: Command™ EFI | Spec: 3064
  • Heavy-duty canister air filtration system
  • 747
  • Kohler
  • 3,750 RPM
  • Fuel Indicator: Electronic Sender
  • Gas EFI
  • Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Lever-actuated disc brake.
  • 23 x 9.50-12, 4 ply Super Turf®| Caster: 13 x 5.0-6, smooth-tread, semi-pneumatic.
  • 23 x 9.50-12, 4 ply Super Turf®
  • 12-volt battery with 20-amp alternator.
  • Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
  • Blade: Approximately 18,500 fpm.
  • Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters: .50" thick caster yoke arms.
  • Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
  • Deck: 52"
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
  • Blades: 3 Blades at 20.50" | 79.2 in. (201.2 cm)
  • 64.8 in. (164.6 cm)
  • 12-gallon (45.4-L), single fuel tank with single fill location.
  • Curb: 1136 lbs
  • Smart Controller | Engine hour meter and cup holder | UPC: 193308225470 | Carb Compliant | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • 52
  • Kohler